ROCK PI 4 Accessories

Shop By
eMMC 5.1 for ROCK 4 / 3A / 5B / 5A / E (also for ODroid)

Plug on eMMC 5.1 storage media for Rock 3A /Rock 4 /Rock5A B /VisionFive2

Available as 16GB/ 32GB/ 64GB or 128GB version.

$11.95

Plug on eMMC 5.1 storage media for Rock 3A /Rock 4 /Rock5A B /VisionFive2

Available as 16GB/ 32GB/ 64GB or 128GB version.

As well compatible to ODroid and Pine

PLEASE NOTE: For your convenience please order as well the eMMC to uSD adapter board or the eMMC USB3.1 Reader. It makes it easy to flash software images on to the eMMC module.

Supported boards:

ROCK PI E, ROCK 3C, 4C+, SE

ROCK 4x - M.2 Extension board v1.6
Translation missing: en.products.product.regular_price $9.99

Divert the M.2 interface of the ROCK 4 by mounting this extension board

Translation missing: en.products.product.regular_price $9.99

Divert the M.2 interface of the ROCK 4 by mounting this extension board

Works with all ROCK Models 4A / 4B /4B+ 

Must be used with Rock 4 heat sink (or ecoPI PRO cases) for proper mount together with Rock 4

The new M.2 Extension board v1.6 was improved based on the community feedback.

Improvements:

Gold plated connectors for stable data transmission

In the previous version the connectors where simple FPC connectors. They could easy break, and the ribbon cable could be mounted wrong. The connectors do not only avoid the cable to be plugged in wrongly, it also has a lock to avoid displacement of the connector.

Improved Ribbon cable with mounted gold plated connectors on both sides 

The previous ribbon cable was always a subject to discussions. People complained that the cable was not providing stable data transmission, because the connection via FPC connector was not precise and well enough. They also said interference could happen because no ground lines where used for isolation inside of the ribbon cable.

Both issues have been addressed. Not only does the cable now have gold plated connectors on both sides, the layout also takes very much care about the shielding between the high speed data lines. Smart arrangement makes sure that no data is lost. The connectors do have additional springs to ensure a stable connection even when the board is moved.

The only disadvantage now is the fact, that the cable length can not easily be adjusted with replacement cables anymore. 

Redesigned interface board to the M.2 connector of Rock 4

One of the sometimes complicated things was mounting the small interface board because it interfered a bit when the eMMC module on the bottom side of the board was mounted. I did not have any negative effects, though many thought it was not possible to mount them together.

The newley updated M.2 extension board with its updated features and specs will make the PCIe experience on your Rock Pi 4 leading edge!

Product includes:

  • M.2 Extension board
  • Mini PCB adapter for the connection to the on-board M.2 socket
  • High performance ribbon cable
  • Mounting bolts and screws

 

 

ROCK PI 802.3at PoE HAT
Translation missing: en.products.product.regular_price $25.00 $19.00 On Sale
Power your ROCK Boards with the ROCK PI 802.3at PoE HAT
Translation missing: en.products.product.regular_price $25.00 $19.00 On Sale
Power your ROCK Boards with the ROCK PI 802.3at PoE HAT

Specs:

  • compliant to the 802.3at standard with 23W
  • PWM controlled fan with up to 12000rpm
  • completely redesigned with performance and heat management in mind
  • very low profile allows usage in smaller housings (fits the ecoPI PRO LP case)
  • alternate variant with GPIO pin pass through available
  • attractive price

Supported boards:

Rock 4 Model B

Rock 4 Model A+

Rock 4 Model B+

Rock 3 Model A 

 

eMMC to uSD board
Translation missing: en.products.product.regular_price $1.95

eMMC to uSD (micro SD) adapter board for effortless flashing SW images on to eMMC modules.

Steps:

  • Click the eMMC module on to the adapter board.
  • Use a micro sd card reader and insert the adapter board with the mounted eMMC module.
  • Plug the micro sd card reader into your computer. (the eMMC module will appear as device in your storage manager)
  • Now flash the software image on to the eMMC module.

Balena Etcher is a very convenient tool for flashing the image on to the eMMC.

Translation missing: en.products.product.regular_price $1.95

eMMC to uSD (micro SD) adapter board for effortless flashing SW images on to eMMC modules.

Steps:

  • Click the eMMC module on to the adapter board.
  • Use a micro sd card reader and insert the adapter board with the mounted eMMC module.
  • Plug the micro sd card reader into your computer. (the eMMC module will appear as device in your storage manager)
  • Now flash the software image on to the eMMC module.

Balena Etcher is a very convenient tool for flashing the image on to the eMMC.

5inch DSI LCD MIPI Display with capacitive touch screen
Translation missing: en.products.product.regular_price $39.00

Plug and play touch screen for your Rock Pi boards 4A(+)/B(+)/N10

  • connects to the MIPI DSI interface on the boards
  • capacitive touch screen
  • 800x400
  • works with Raspberry Pi as well

 

Translation missing: en.products.product.regular_price $39.00

Plug and play touch screen for your Rock Pi boards 4A(+)/B(+)/N10

  • connects to the MIPI DSI interface on the boards
  • capacitive touch screen
  • 800x400
  • works with Raspberry Pi as well

 

RADXA 8inch DSI LCD MIPI Display with capacitive touch
Translation missing: en.products.product.regular_price $65.00 $55.00 On Sale

Plug and play touch screen for your Rock boards 5A / 5B / 4C+

Translation missing: en.products.product.regular_price $65.00 $55.00 On Sale

Plug and play touch screen for your Rock boards 5A / 5B / 4C+

  • connects to the MIPI DSI interface on the boards
  • 5-point capacitive touch screen
  • CABC (Content Adaptive Brightness Control)
  • 800x1280 IPS panel
  • 16.7m colors
  • G+G TP+G sensor
  • mounting threads for Rock boards
  • works with Raspberry Pi as well
  • panel can be glued into e.g. a frame or case
  • Temp range -20 to 60° C
  • Active Area:  107.64(H) x 172.224(V) mm
  • Physical Dimension (L/W/H) 199.22 x 127.00 mm x 3.2mm

PLEASE NOTE:

RADXA 8HD-A can also be used with Rock 4 Model C+ v1.41

 

     

    MIPI DSI adapter cable for Rock Pi 4C+, Radxa Zero2 or ROCK 5B boards
    Translation missing: en.products.product.regular_price $0.99

    Connect your standard MIPI display to Rock Pi 4C+, Radxa Zero2 or ROCK 5B boards

    Translation missing: en.products.product.regular_price $0.99

    Connect your standard MIPI display to Rock Pi 4C+, Radxa Zero2 or ROCK 5B boards

    Make use of your existing MIPI display on new Rock Pi board models

    0.3mm pitch 4lanes ROCK 4C Plus/5B/Zero2 DSI to 1mm pitch 2lanes Raspberry Pi DSI

    Product content:

    1 pieces ribbon cable adapter (40->15pin)

    Length:

    100mm

    RPI Camera MIPI CSI adapter cable for Rock Pi 4C+
    Translation missing: en.products.product.regular_price $0.99 Sold Out

    Connect your Raspberry Pi CAM to Rock Pi 4C+

    Translation missing: en.products.product.regular_price $0.99 Sold Out

    Connect your Raspberry Pi CAM to Rock Pi 4C+

    Make use of your existing Raspberry Pi Cam on new Rock Pi board models

    Product content:

    1 pieces FPC cable adapter (15->15pin)

    Length:

    100mm

    Rock Pi E Developers package
    Translation missing: en.products.product.regular_price $5.99

    Rock Pi E based development made convenient!

    Translation missing: en.products.product.regular_price $5.99

    Rock Pi E based development made convenient!

    • Board protection through acrylic cover
    • Easy access to all relevant parts of the board
    • includes GPIO extension pin header
    • cut out for easy removal and mount of the eMMC module
    • includes dual band antenna

    Product content:

    • Acrylic cover with mounting screws and bolts
    • 40 pin GPIO extension pin header
    • 2.4/5GHz antenna kit with pigtail

    Just add the Rock Pi E of your choice and you are ready to go!

    Power Supply Adapter QC 3.0 for ROCK PI 4
    Translation missing: en.products.product.regular_price $6.95

    ROCK PI 4 Accessory

    Power Supply Adapter QC 3.0

    Input: AC110-240V 50/60Hz 0.3A
    Output: DC5V=2.6A / 9V=1.7A / 12V=1.3A

    US and EU plug available 

    CE FCC RoHS

    Translation missing: en.products.product.regular_price $6.95

    ROCK PI 4 Accessory

    Power Supply Adapter QC 3.0

    Input: AC110-240V 50/60Hz 0.3A
    Output: DC5V=2.6A / 9V=1.7A / 12V=1.3A

    US and EU plug available 

    CE FCC RoHS

    USB 2.0 Male Type A to C 3A 1m for ROCK PI
    Translation missing: en.products.product.regular_price $2.95

    ROCK PI Accessory

    Power cable for QC adapter

    Length: 1m

    Translation missing: en.products.product.regular_price $2.95

    ROCK PI Accessory

    Power cable for QC adapter

    Length: 1m

    M.2 to PCIe X4 adapter
    Translation missing: en.products.product.regular_price $3.99
    Make your M.2 interface accessible for PCIe PC size cards on your Rock Pi 4
    Translation missing: en.products.product.regular_price $3.99
    Make your M.2 interface accessible for PCIe PC size cards on your Rock Pi 4
    • easy to mount on to the M.2 extension board
    • convert the M.2 interface to a standard PCIe X4 slot
    • expand the available interfaces of your Rock Pi 4
    • comes with an additional 12V power cable
    • please check the compatibility of your slot card with Rock Pi 4

    Rock Pi 4 does not support additional graphics cards via PCIe interface 


    Login