Products
Passive heat management for CM3 CPU
Passive heat management for CM3 CPU
- aluminum heat sink for CPU mount
- high performance heat conductive tape
- black color for best heat dissipation
- height optimal for low profile cases
- 14x14x6mm
Perfectly manage the temperature of your NVMe SSD with this economy heat sink.
Perfectly manage the temperature of your NVMe SSD with this economy heat sink.
The set includes:
- Cleaning kit
- Aluminum heat sink
- Thermal pad
- Rubber rings for mounting the heat sink including thermal pad on your SSD
Optimal temperature levels even during peak CPU load
Optimal temperature levels even during peak CPU load
- aluminum heat sink for CPU mount
- high performance heat conductive tape
- low height optimal for low profile cases
Optimal temperature levels even during peak CPU load
Optimal temperature levels even during peak CPU load
- aluminum heat sink for CPU mount
- high performance heat conductive tape
- black color for best heat dissipation
- height optimal for low profile cases
*pls note: can not be used with PoE hat
Custom made high-density LED strip with great power efficiency - 198LEDs/m
Shines brightly while only using very little power compared to normal ws2812b-5050 LED strips. Because of the high density, effects look more fluid and vivid!
Perfect to use with a QuinLED-Dig-Uno running WLED!
Custom made high-density LED strip with great power efficiency - 198LEDs/m
Shines brightly while only using very little power compared to normal ws2812b-5050 LED strips. Because of the high density, effects look more fluid and vivid!
Perfect to use with a QuinLED-Dig-Uno running WLED!
Product specifications:
- WS2812c-2020 LED chip
- 5v
- Low Power/Efficient
- Official specs 15mA per LED official total usage
- Real world usage around 10mA per channel max
- For 2 meters
- Single color (Red, Green or Blue) ~3,5Amps
- RGB White ~9Amps
- 2kHz PWM frequency (works ok on camera)
- Compatible with ws28xx protocol (WLED, etc.)
- 8mm wide strip
- 198 LEDs/m
- IP30 (not weather sealed)
- Cuttable to length per LED (Solder pads on the back)
The perfect enclosure for your QUAD SATA / PENTA HAT build
The perfect enclosure for your QUAD SATA / PENTA HAT build
- strong aluminum case
- 5 drive bays for 2.5 and 3.5" disks
- LED indicators for power and activity
- hot swap-able drive bays
- internal fan
- mountable in e.g. computer case with 5.25" slots
- strong back plane
Product dimensions: 22.5x 13x 15cm
Weight: 2.8kg
Note: you need an external e.g. ATX power supply to power the drives and the extension case fan
Integrate full size PCIe accessories to your Rock Pi 4 setup
- perfectly built
- high quality connectors
- no interference with the board
Please make sure that purchased PCIe boards are supported by Rockchip 3399 and related OS.
Integrate full size PCIe accessories to your Rock Pi 4 setup
- perfectly built
- high quality connectors
- no interference with the board
Please make sure that purchased PCIe boards are supported by Rockchip 3399 and related OS.
Marvell 9235 based M.2 PCIe to 4x SATA3.0 module
Marvell 9235 based M.2 PCIe to 4x SATA3.0 module
Product Specs
- Marvell 9235 based M.2 module
- 2-Lane M.2 PCI-Express 2.0 interface (B + M Key)
- Communication speed of 6.0Gbps,3.0Gbps,1.5Gbps.
- IDE programming interface register for the SATA controller.
- AHCI programming interface register for the SATA controller.
- Message Signaled Interrupt(MSI).
- Compliant with Serial ATA Specification 3.0.
- Programmable transmitter signal levels.
- Compliant to Gen 1i,Gen 1x,Gen 2i,Gen 2m,Gen 2x,and Gen 3i.
- 4 SATA 3.0 Ports.
- Native Command Queuing (NCQ)
- FIS based Port Multiplier
- Note: No hardware RAID
Can only be used with the Rock Pi M.2 Extension board on Rock Pi 4!
When installing with the ROCK PI M.2 Extension board please handle with care, and read the attached note in the package!
- 1 x M.2(PCIe) to SATA 6G adapter
- 1 x User Manual
- 1 x Driver CD
- 2 x SATA Power Cable for 2 SATA devices
- 4 x SATA Cable
Software Requirements:
Windows Server 2003,2008,2012,2016
Windows XP, Vista, 7, 8,8.1,10
Linux 2.6.x and above
Mac OS 10.3 or later version
Linux distributions contain Inbox drivers for AHCI devices.The drivers are installed automatically during the Linux OS installation.
original M.2 extension board spare part
original M.2 extension board spare part
- easy to mount on to the M.2 extension board
- convert the M.2 interface to a standard PCIe X4 slot
- expand the available interfaces of your Rock Pi 4
- comes with an additional 12V power cable
- please check the compatibility of your slot card with Rock Pi 4
Rock Pi 4 does not support additional graphics cards via PCIe interface
M.2 Wireless Module based on RTL8723BE chip
M.2 Wireless Module based on RTL8723BE chip
It has the following features:
- IEEE 802.11 b/g/n, 36Mbps
- Bluetooth 4.2
- RTL8723BE
- uFL connector 2x
- incl. 2 PCB antennas
works e.g. perfectly with Rock 3A