QuinLED Controllers and Accessories

Shop By
QuinLED-ESP32
New

Custom ESP32 development board

  • ESP32 WROOM32 module version “D or E” on board
  • Enhanced onboard capacitors
  • USB-C host port
  • PTC fuse / 5V 750mA
  • 800mA onboard linear 3.3v converter
  • Onboard CH340C USB-to-serial chip
  • Enhanced pin-out
  • Small form factor
  • -->Also available as "legacy" version for previous QuinLED boards
$5.50

Custom ESP32 development board

  • ESP32 WROOM32 module version “D or E” on board
  • Enhanced onboard capacitors
  • USB-C host port
  • PTC fuse / 5V 750mA
  • 800mA onboard linear 3.3v converter
  • Onboard CH340C USB-to-serial chip
  • Enhanced pin-out
  • Small form factor
  • -->Also available as "legacy" version for previous QuinLED boards

3 available versions:

  • QuinLED-ESP32-AB (Antenna Board)
  • QuinLED-ESP32-AE (Antenna External)
  • QuinLED-ESP32-ABE (Antenna Board + Ethernet top board)

Product content:

  • QuinLED ESP32 module
  • various pin headers


ESP32 Mini with pre flashed WLED image
translation missing: en.products.product.regular_price $5.99

Replacement or upgrade ESP32 for your QuinLED UNO or QUAD boards

Soldered pin headers

Pre-Flashed WLED software

translation missing: en.products.product.regular_price $5.99

Replacement or upgrade ESP32 for your QuinLED UNO or QUAD boards

Soldered pin headers

Pre-Flashed WLED software

Acrylic case for QuinLED Dig Uno
New
translation missing: en.products.product.regular_price $2.50

Protect your digital controller with this simple acrylic case.

translation missing: en.products.product.regular_price $2.50

Protect your digital controller with this simple acrylic case.

  • Easy access to the vitals of the controller
  • Compact
  • Fits into the smallest compartment

Product content:

Acrylic sheets, brass bolts and screws for assembly

Acrylic case for QuinLED Dig Quad ! legacy !
New
translation missing: en.products.product.regular_price $4.50

Protect your quad digital controller with this simple acrylic case.

translation missing: en.products.product.regular_price $4.50

Protect your quad digital controller with this simple acrylic case.

  • Easy access to the vitals of the controller
  • Compact
  • Protects the ESP32 module, screw terminals
  • Covers areas of high current

Product content:

Acrylic sheets, brass bolts and screws for assembly

DC Connector wired for e.g. QuinLED Dig Uno
New
translation missing: en.products.product.regular_price $1.90

For a convenient testing environment with your controller

translation missing: en.products.product.regular_price $1.90

For a convenient testing environment with your controller

  • DC connector with screw terminal
  • DC 5.5/2.5 barrel
  • max 5A current
  • cable length 6cm
DC12V 5A (60W) wall plug Power Supply
New
translation missing: en.products.product.regular_price $9.98

Universal and flexible 12V 5A DC power supply with exchangeable power plug

Stable and sufficient power for your Sata HAT and SATA KIT setup!

translation missing: en.products.product.regular_price $9.98

Universal and flexible 12V 5A DC power supply with exchangeable power plug

Stable and sufficient power for your Sata HAT and SATA KIT setup!

INPUT

  • 100-240V
  • ~ 50/60Hz 1.5A

OUTPUT

  • Regulated +12VD
  • Current 5A

CERTIFICATES

  • CE, GS, CB, UL/CUL, FCC, PSE, CCC, RoHS, Reach

SPECIAL

  • exchangeable power plug for US, EU, UK, AU
  • (other country plugs on request) 

DIMENSION

  • 100x50x40mm
  • wire length 1m
  • DC Barrel (5.5x2.5) 90° 

PRODUCT CONTENT

  • power supply
  • country plug
  • additional country plugs (optional)
ONE to TWO power or power and data expander
New
translation missing: en.products.product.regular_price $2.88

Turn ONE into TWO with this handy spring wire adapter!

translation missing: en.products.product.regular_price $2.88

Turn ONE into TWO with this handy spring wire adapter!

  • Easy to use
  • AWG35-10
  • 250V/600V
  • 30A rated
  • 0.08-6mm² wire dimension 
  • mounting holes on the connector
  • no screwdriver needed
  • perfect to split power and data to two LED stripes on your QinLED products
QuinLED Dig Quad v2 DIGITAL LED controller    !NEW release!
New

Packed with the feature-set of the well known Dig Uno controller plus 2 times the output channels and a blasting current of up to 30A show the muscles of this controller. NEW! many improvements, generic WLED support and 3 different ESP32 variants!

$37.50

Packed with the feature-set of the well known Dig Uno controller plus 2 times the output channels and a blasting current of up to 30A show the muscles of this controller. NEW! many improvements, generic WLED support and 3 different ESP32 variants!

The onboard QuinLED ESP32 module with generic WLED support comes in 3 different variants and preloaded software.

QuinLED Dig Quad perfectly integrates into your home automation or performs as a stand alone solution!

Technical details:

  • QuinLED ESP32 based programmable LED controller with 4 independent output channels
  • Compatible to open firmware e.g. ESPhome, ESPpixelstick or custom Arduino code
  • Integrates with MQTT or Home Assistant native API (use WLED FW)
  • Remote control available via Android or iOS app (WLED FW)
  • Can be used for E1.31 with Xlights /Vixen software (use WLED or ESPpixelstick FW)
  • High current handling (up to 30A)
  • On-board 5x 5A fuse and reverse polarity protection
  • Compatible to 5V* and 12V** LED strips, strings or panels
  • On-board DS18B20 temperature sensor
  • 6 GPIO pins (e.g. Audio, PS Relay, IR control or I2C display)
  • Works with most currently available LED strips/strings or panels*

* ws2811, ws2812b, sk6812, APA102

**ws2811, ws2815

Product content:

  • QuinLED Dig Quad LED controller board
  • QuinLED ESP32 WIFI module with USB-C interface (3 different variants available)
  • 5x 5A fuses
  • Pre flashed WLED firmware for instant use

OUTSTANDING!

  • With a few simple steps to a working system
  • Easy to use and at the same time ready for complex setups
  • Extremely detailed library and resources
  • Very supportive community and developer
  • You have a question to LED and LED related applications - go QuinLED

    Youtube introduction and instructions (click on the text):

    More details and resources here:

    • In depth information on LEDs
    • Wiring diagrams, articles, simply everything related to LEDs
    • https://quinled.info
    QuinLED Dig Uno v3 DIGITAL LED controller !NEW with ESP32!
    New

    Extremely cool, flexible and easy to use Digital LED controller!

    Perfectly integrates into your home automation or easy to use as a stand alone solution! Now even better - with generic WLED support and Dual Channel!

    $27.50

    Extremely cool, flexible and easy to use Digital LED controller!

    Perfectly integrates into your home automation or easy to use as a stand alone solution! Now even better - with generic WLED support and Dual Channel!

    Technical details:

    • QuinLED ESP32 based programmable LED controller
    • Choice of 3 different ESP32 module variants
      • AB (Antenna Board)
      • AE (Antenna External) (incl. ext. antenna)
      • ABE (Antenna Board + Ethernet)
    • Dual Channel controller (when using WLED 0.12.0)
    • Official WLED support
    • Compatible to open firmware e.g. ESPhome, ESPpixelstick or custom Arduino code
    • Integrates with MQTT or Home Assistant native API (use WLED FW)
    • Remote control available via Android or iOS app (WLED FW)
    • Can be used for E1.31 with Xlights /Vixen software (use WLED or ESPpixelstick FW)
    • Auto 5V-24V input voltage select
    • Auto 5vEXT with 5-24V standby auto select
    • High current handling (up to 15A)
    • On-board fuse and reverse polarity protection
    • Compatible to 5V* and 12V** LED strips, strings or panels
    • optional On-board temperature sensor (mounted on demand***)
    • 6 GPIO pins (e.g. PS Relay, IR control or I2C display)
    • Works with most currently available LED strips/strings or panels*

    * ws2811, ws2812b, sk6812, APA102

    **ws2811, ws2815

    ***pls contact us via shop_cn@allnetchina.cn

    Product content:

    • QuinLED Dig Uno v3r7 LED controller
    • QuinLED-ESP32 WIFI module with USB-C interface
    • Pre flashed WLED firmware for instant use
    • please check the different product variants available

    OUTSTANDING!

    • With a few simple steps to a working system
    • Easy to use and at the same time ready for complex setups
    • Extremely detailed library and resources
    • Very supportive community and developer
    • You have a question to LED and LED related applications - go QuinLED

      Youtube introduction and instructions (click on the text):

      More details and resources here:

      • In depth information on LEDs
      • Wiring diagrams, articles, simply everything related to LEDs
      • https://quinled.info

        Last but not least a great 3D printable case:  https://www.thingiverse.com/thing:4153725

        Login