Top New Arrivals

Shop By
Rock3 Model C
New
$39.00 Sold Out

ROCK 3C features a quad core Cortex-A55 ARM processor, 32bit 3200Mb/s LPDDR4 and up to 4K@60 HDMI 

$39.00 Sold Out

ROCK 3C features a quad core Cortex-A55 ARM processor, 32bit 3200Mb/s LPDDR4 and up to 4K@60 HDMI 

 

Rockchip RK3566 64bit quad core based SBC

With a small form-factor, various interfaces, outstanding design and performance it is the perfect entry level SBC for your personal or business oriented projects.

Rock3 Model C product details

RK3566 64bit quad core processor

Quad-core Cortex-A55, frequency 1.6Ghz

GPU 

Mali G52

NPU

0.8TOPS NPU

Memory LPDDR4 

LPDDR4@2112MT/s, 1/ 2/ 4/ 8GB variants

Wifi/BT Antenna

Wifi/BT with external antenna support (uFL)

Storage

eMMC module (optional)

Optional industrial level high performance eMMC module, 16G/32G/64G/128G available (click on module bottom side)

Micro SD card

uSD card slot supports up to 128GB uSD card

M.2 SSD

M.2 (M) 2230 up to 1T M.2 NVME SSD

Display HDMI

HDMI 2.0 up to 4k*2k@60

MIPI DSI 2 lanes via FPC connector

HDMI and MIPI DSI can not work at the same time

Audio

Audio 3.5mm jack with mic with improved mechanics

HD codec that supports up to 24-bit/96kHz audio

Camera

MIPI CSI 2 lanes via FPC connector, support up to 800 MP camera

Wireless

Wireless 802.11 ac

WiFi 5 / Bluetooth 5

USB

USB 3.0 HOST x1

USB 2.0 OTG port x1 (middle upper one)

USB 2.0 HOST x2

default - DEVICE, activate - HOST via serial command GPIO header

Ethernet

GbE LAN (with Power over Ethernet (PoE) support via additional PoE HAT)

IO 40-pin expansion header :

- 5 x UART
- 1 x SPI bus
- 2 x I2C bus
- 6 x PWM
- 1 x ADC
- 6 x GPIO
- 2 x 5V DC power in
- 1 x 3.3V power in

Others

RTC

RTC battery connector for time backup (optional)

Power button

Dual pin PWM fan header (controller chip onboard)

Power USB-C recommended 5V/3A (5V/5A is recommended when using with SSD)

Size 85mm x 56mm

NOTE! Fits mechanically many of the existing Raspberry Pi 4 accessories

Essentials You Need

  • ROCK 3 Model C
  • Power adapter with USB type C port equal or larger than (5V3A) 15W (or 5V5A - 25W with mounted SSD)
  • MicroSD Card or eMMC module with eMMC-to-uSD adapter board
  • Keyboard & Mouse
  • Monitor with HDMI input

_________________________________________________________

Additional information & Setup instructions

https://wiki.radxa.com/Rock3/getting_started/rock-3c

_________________________________________________________


RADXA E25
New
$59.00

RADXA E25 - a networking Single Board Computer in an ultra-small form factor providing a wide range of networking capabilities.

The Radxa E25 offers makers, IoT enthusiasts, hobbyists, PC DIY enthusiasts and others a reliable and extremely capable platform for building and tinkering their ideas into reality.

$59.00

RADXA E25 - a networking Single Board Computer in an ultra-small form factor providing a wide range of networking capabilities.

The Radxa E25 offers makers, IoT enthusiasts, hobbyists, PC DIY enthusiasts and others a reliable and extremely capable platform for building and tinkering their ideas into reality.

Hardware overview:

  • Upgradeable SoM and carrier Board design with easy to assemble case and heatsink
  • Rockchip RK3568 with Quad core Cortex‑A55 (ARM v8) 64‑bit SoC @ 2.0GHz
  • Mali G52 gpu, supports OpenGL ES 3.2/OpenCL 2.0/Vulkan 1.1
  • 1Tops NPU with RKNN Toolkit support
  • 1GB/ 2GB/ 4GB/ 8GB LPDDR4 RAM
  • Expansion via M.2 and mini PCIe interface for 4G/5G mobile network

Interfaces:

  • 1x USB C for power and serial console management
  • 2x 2.5G ethernet
  • 1x M.2 Connector for 4G LTE network network or M.2 SATA 2242
  • 1x mini PCIe connector for AP WiFi or 5G cellular network
  • 1x SD Card for storage or OS
  • 1x nano SIM card slot
  • 1x USB3 Type A 5Gbps OTG ports
  • 1x user button
  • 26x user GPIO supporting various interface options:

up to 3 x UART
up to 2 x SPI bus
1 x I2C bus
1 x PCM/I2S
1 x CAN
up to 6 x PWM
1 x ADC
up to 17 x GPIO
2 x 5V DC power pin
2 x 3.3V power pin

Software:

  • ARMv8 Instruction Set
  • Debian/Ubuntu Linux Server support
  • Hardware access/control library for Linux

Power options and demands:

  • via USB C with 5V2A
  • via USB C with 5V4A with all peripherals connected
  • via GPIO PIN 2&4 with 5V 

Peripherals:

  • GPIO Interface 26pin (compatible with common accessories in the market)
  • eMMC
  • USB
  • M.2 B Key connector
  • MINI PCIe connector

 Case:

  • E25 comes with a case which has an integrated heat sink
ROCK 4 Model C+
New

Rockchip RK3399T 64bit hexa core based SBC

With a small form-factor, dual screen, outstanding design and performance it is the perfect choice for your personal or business oriented projects.

$69.00

Rockchip RK3399T 64bit hexa core based SBC

With a small form-factor, dual screen, outstanding design and performance it is the perfect choice for your personal or business oriented projects.

Rock 4 Model C+ 4GB product details

 

RK3399T 64bit hexa core processor

Dual Cortex-A72, frequency 1.5GHz (oc to 2GHz) with quad Cortex-A53, 1.4Ghz (os to 1.6GHz) with separate NEON coprocessor

GPU 

Mali T860MP4 gpu, supports OpenGL ES 1.1 /2.0 /3.0 /3.1 /3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11.

Memory LPDDR4 

64bit dual channel LPDDR4@3200Mb/s, 4GB

SPI Flash (optional)

32Mb SPI flash can be mounted - NVMe boot or e.g. Network boot via SPI supported*

*will reduce available DSI lanes by 2

Wifi/BT Antenna (for Wifi model)

Wifi/BT with external antenna support (uFL)

Storage eMMC module (optional)

Optional industrial level high performance eMMC module, 16G/32G/64G/128G available (click on module bottom side)

Micro SD card

SD card slot supports up to 128GB uSD card

M.2 SSD

M.2 (M) 2230 up to 2T M.2 NVME SSD via PCIe 2.0 x4 interface

Display HDMI

Micro HDMI 2.0 up to 4k@60 (Type D), H.265/VP9 (HEVC) hardware decode

Micro HDMI 2.0 up to 2k@60 (Type D), H.264 hardware decode

Peripherals

Display MIPI DSI

MIPI DSI 4 lanes display via FPC connector

Two of HDMI/HDMI2/MIPI DSI can work at the same time, support mirror or extend mode.

Camera MIPI CSI

MIPI CSI 2 lanes via FPC connector, support up to 8MP camera

Audio

Audio 3.5mm jack with mic with improved mechanics

HD codec that supports up to 24-bit/96kHz audio

Output can drive 32Ohm head phones directly

USB 3.0

USB 3.0 HOST x1

USB 3.0 OTG port x1 (upper one)

default - DEVICE, activate - HOST via serial command GPIO header

USB 2.0

 2x USB HOST ports

Network

Wireless (wifi version only)

Wireless 802.11 b/g/n/ac

Bluetooth 5.0

LAN

GbE LAN (with PoE support via add on PoE HAT)

IO 40-pin expansion header :

- 1 x UART
- 2 x SPI bus
- 2 x I2C bus
- 1 x PCM/I2S
- 1 x SPDIF
- 1 x PWM
- 1 x ADC
- 6 x GPIO
- 2 x 5V DC power in
- 2 x 3.3V power pin

Others

Power button

Dual pin PWM fan header (controller chip onboard)

Power USB-C recommended 5V/5A

Size 85mm x 54mm

NOTE! Fits mechanically many of the existing Raspberry Pi 4 accessories

Essentials You Need

  • ROCK PI 4, Model A/B or Model C/C+
  • Power adapter with USB type C port equal or larger than (5V3A) 15W (or 5V5A - 25W with mounted SSD)
  • MicroSD Card or eMMC module with eMMC-to-uSD adapter board
  • Keyboard & Mouse
  • Monitor with HDMI input

______________________________________________________

Additional information & Setup instructions

https://wiki.radxa.com/Rockpi4

______________________________________________________

ROCK 4 Model B+ - Board only (2,4/5GHz WLAN  Bluetooth 5.0)
New

Rockchip OP1 64bit hexa core based SBC

Small form-factor, rich feature set, outstanding design and 11% more performance.

$75.00

Rockchip OP1 64bit hexa core based SBC

Small form-factor, rich feature set, outstanding design and 11% more performance.

Rock Pi 4 B+ is the perfect choice for your personal or business oriented projects.

Rock Pi 4B+ product details

OP1 64bit hexa core processor

Dual Cortex-A72 (up to 2.0Ghz) plus quad Cortex-A53 (up to 1.5Ghz) Harvard Superscalar processor cores

GPU 

Mali T860MP4 GPU, supports OpenGL ES 1.1 /2.0 /3.0 /3.1 /3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11.

Memory LPDDR4 

64bit dual channel LPDDR4@3200Mb/s, 2GB or 4GB

SPI Flash

optional

Wifi/BT Antenna

Wifi/BT with external antenna support*

*an uFL connector must be soldered on the board, which will then disable the on board antenna. Connector and soldering service available in the store!

Onboard eMMC module

Industrial level high performance eMMC storage, 16G/32G/64G/128G available (soldered)

Micro SD card

uSD slot supports up to 128G uSD card

M.2 SSD

M.2 connector supports up to 2T M.2 NVME SSD

note: M.2 extension board plus heat-sink is recommended for proper mounting on Rock Pi 4 "+"

Display HDMI

HDMI 2.0 up to 4k@60

Peripherie

MIPI DSI 2 lanes via FPC connector

HDMI and MIPI DSI can work at the same time, support mirror mode or extend mode.

Audio 3.5mm jack with mic with improved mechanics

HD codec that supports up to 24-bit/96kHz audio.

Camera MIPI CSI

MIPI CSI 2 lanes via FPC connector, support up to 8MP camera

USB 3.0 OTG x1

hardware switch for host/device switch, upper one

USB 3.0 HOST x1

dedicated USB3.0 channel, lower one

USB 2.0 HOST x2

Ethernet GbE

Network

Wireless 802.11 ac wifi 2,4/5GHz

Bluetooth 5.0

LAN

GbE LAN with PoE support

additional HAT is required for powering via PoE

IO 40-pin expansion header :

- 1 x UART
- 2 x SPI bus
- 2 x I2C bus
- 1 x PCM/I2S
- 1 x SPDIF
- 1 x PWM
- 1 x ADC
- 6 x GPIO
- 2 x 5V DC power in
- 2 x 3.3V power pin

Others

RTC battery connector for time backup

Power USB PD

Support USB Type C PD 2.0, 9V/2A, 12V/2A

Power Supply Qualcomm® Quick Charge™

Support QC3.0/2.0 adapter, 9V/2A, 12V/1.5A

Size 85mm x 54mm

 

Essentials You Need

  • ROCK PI 4 Model A or Model B / B+
  • PD/QC compliant power adapter with USB- C port equal or more than 15W
  • Keyboard & Mouse
  • Monitor with HDMI input
  • Heat Sink 
  • optional M.2 extension board

______________________________________________________

Additional information & Setup instructions

https://wiki.radxa.com/Rockpi4

______________________________________________________

Rock Pi S Core SoM
New
translation missing: en.products.product.regular_price $19.99 Sold Out

If you plan to develop your own projects , Rock Pi S Core will be the right choice.

LIMITED AVAILABILITY OF ENGINEERING SAMPLES - ONLY FOR EXPERIENCED USERS!

Rock Pi S Core is the SoM based on Rock Pi S with CPU/RAM/Storage/Wireless on a small stamp footprint at 35x35mm.

translation missing: en.products.product.regular_price $19.99 Sold Out

If you plan to develop your own projects , Rock Pi S Core will be the right choice.

LIMITED AVAILABILITY OF ENGINEERING SAMPLES - ONLY FOR EXPERIENCED USERS!

Rock Pi S Core is the SoM based on Rock Pi S with CPU/RAM/Storage/Wireless on a small stamp footprint at 35x35mm.

Features:

  • Quad-core ARM Cortex-A35 CPU
  • Full implementation of the ARM architecture v8-A instruction set
  • ARM Neon Advanced SIMD (single instruction, multiple data) support for accelerated media and signal processing computation
  • ARMv8 Cryptography Extensions
  • Include VFP v3 hardware to support single and double-precision operations
  • TrustZone technology support
  • 256MB/512MB RAM option
  • 128M to 4GB storage option
  • 802.11 a/b/g/n wifi Bluetooth 2.1/4.2(Realtek RTL8723DS)
  • support eMMC up to 128GB
  • support uSD card up to 128GB
  • 120 PIN available  ( ROCK Pi S Core SOM PINOUT )


Rock Pi X
$49.00 Sold Out

ROCK PI X Model B

The long awaited Intel based member of the Rock Pi family is finally available. Perfect for IoT applications based on Windows or Linux OS

$49.00 Sold Out

ROCK PI X Model B

The long awaited Intel based member of the Rock Pi family is finally available. Perfect for IoT applications based on Windows or Linux OS

Processor

64bit Quad Core X86 Processor
Intel(R) Atom(TM) x5-Z8350 Cherry Trail
Quad-core processor @ 1.44 GHz / 1.84 GHz (Turbo)
Intel Gen8 HD graphics @ 500 MHz

Memory

LPDDR3
64bit dual channel LPDDR3@1866Mb/s, 1GB/2GB/4GB optional

Storage

eMMC module (Optional industrial compatible high performance eMMC module, 16GB/32GB/64GB/128GB available)
μSD card (μSD slot supports up to 128 GB μSD card)

Display

HDMI 2.0 up to 4k@30

HDMI EDID feature for proper display detection

Audio

3.5mm jack with mic
HD codec that supports up to 24-bit/96KHz audio.

Wireless

802.11 ac wifi
Bluetooth 4.2
with on board antenna and external antenna support.

USB

USB 3.0 OTG X1, hardware switch for host/device switch, lower one
USB 2.0 HOST X3

Ethernet

GbE LAN with Power over Ethernet (PoE) support
additional HAT is required for powering from PoE

IO

40-pin expansion header
2 x UART
2 x SPI bus
2 x I2C bus
1 x PCM/I2S
1 x SPDIF
2 x PWM
1 x ADC
6 x GPIO
2 x 5V DC power in
2 x 3.3V DC power in

Other

RTC
RTC battery connector for time backup(optional)

Power

USB PD, support USB Type C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A.
Qualcomm® Quick ChargeTM: Supports QC 3.0/2.0 adapter, 9V/2A, 12V/1.5A

Size

85mm x 54mm

The purchase of the related heat sink is recommended!

Rock Pi X heatsink

Rock Pi X case

Rock Pi S PoE HAT
New
translation missing: en.products.product.regular_price $14.00
Power your Rock Pi S and export additional features via this PoE hat!
translation missing: en.products.product.regular_price $14.00
Power your Rock Pi S and export additional features via this PoE hat!

Features:

  • 802.3af standard up to 10W (5V2A)
  • headphone jack exported
  • PDM mic array connector exported (ribbon connector)
  • 12V power output with screw terminal
  • EEPROM for HAT identity and driver probe
  • compact form factor
  • fits the optional Rock Pi S case

Product content:

  • Rock Pi S PoE HAT
  • spacers and screws

 Please update to the latest firmware for full feature support!

ecoPI S housing for Rock Pi S
New
translation missing: en.products.product.regular_price $4.99

Protect and mount your Rock Pi S with this new functional case

translation missing: en.products.product.regular_price $4.99

Protect and mount your Rock Pi S with this new functional case

  • aluminum enclosure
  • enough height for GPIO based accessories
  • mounting holes for wall mount (optional bracket needed)
  • useful openings for all additional accessories e.g. antenna

Product content:

  • aluminum housing
  • screw kit

Options:

  • Dual band antenna kit
  • Wall mount bracket
ecoPI PRO X LP Aluminum housing for ROCK PI X
New
translation missing: en.products.product.regular_price $29.90

Luxury version for the engaged ROCK PI X fan!

Perfect as media player or workstation housing with e.g. the PoE HAT option

translation missing: en.products.product.regular_price $29.90

Luxury version for the engaged ROCK PI X fan!

Perfect as media player or workstation housing with e.g. the PoE HAT option

  • Integrated heat-sink
  • sufficient height for assembly including the PoE HAT
  • ON/OFF button
  • Antenna hole for pigtail mount
  • Easy access to the board
  • remove only 4 screws to get complete access to your ROCK PI X
  • attractive clean design
  • improved heat management (30% increased heat-sink)
  • very convenient access to SD card slot without opening the case
  • has enough height to get the PoE hat set up inside the case
  • Dimension 94x70x40mm

Package content

  • Aluminum housing
  • acrylic cover
  • screws
  • silicon feet

Perfect as low power workstation. Can be fixed with the VESA mount kit on the display

ROCK 4 Model A+ - Board only (without WLAN / Bluetooth)
New

Rockchip OP1 64bit hexa core based SBC

Small form-factor, rich feature set, outstanding design and 11% more performance.

$70.00

Rockchip OP1 64bit hexa core based SBC

Small form-factor, rich feature set, outstanding design and 11% more performance.

Rock Pi 4 A+ is the perfect choice for your personal or business oriented projects.

Rock Pi 4A+ product details

OP1 64bit hexa core processor

Dual Cortex-A72 (up to 2.0Ghz) plus quad Cortex-A53 (up to 1.5Ghz) Harvard Superscalar processor cores

GPU 

Mali T860MP4 GPU, supports OpenGL ES 1.1 /2.0 /3.0 /3.1 /3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11.

Memory LPDDR4 

64bit dual channel LPDDR4@3200Mb/s, 2GB or 4GB

SPI Flash

optional

Onboard eMMC module

Industrial level high performance eMMC storage, 16G/32G/64G/128G available (soldered)

Micro SD card

uSD slot supports up to 128G uSD card

M.2 SSD

M.2 connector supports up to 2T M.2 NVME SSD

note: M.2 extension board plus heat-sink is recommended for proper mounting on Rock Pi 4 "+"

Display HDMI

HDMI 2.0 up to 4k@60

Peripherie

MIPI DSI 2 lanes via FPC connector

HDMI and MIPI DSI can work at the same time, support mirror mode or extend mode.

Audio 3.5mm jack with mic with improved mechanics

HD codec that supports up to 24-bit/96kHz audio.

Camera MIPI CSI

MIPI CSI 2 lanes via FPC connector, support up to 8MP camera

USB 3.0 OTG x1

hardware switch for host/device switch, upper one

USB 3.0 HOST x1

dedicated USB3.0 channel, lower one

USB 2.0 HOST x2

Ethernet GbE

Network

GbE LAN with PoE support

additional HAT is required for powering via PoE

IO 40-pin expansion header :

- 1 x UART
- 2 x SPI bus
- 2 x I2C bus
- 1 x PCM/I2S
- 1 x SPDIF
- 1 x PWM
- 1 x ADC
- 6 x GPIO
- 2 x 5V DC power in
- 2 x 3.3V power pin

Others

RTC battery connector for time backup

Power USB PD

Support USB Type C PD 2.0, 9V/2A, 12V/2A

Power Supply Qualcomm® Quick Charge™

Support QC3.0/2.0 adapter, 9V/2A, 12V/1.5A

Size 85mm x 54mm

 

Essentials You Need

  • ROCK PI 4 Model A /A+ or Model B / B+
  • PD/QC compliant power adapter with USB- C port equal or larger than 15W
  • Keyboard & Mouse
  • Monitor with HDMI input
  • Heat Sink 
  • optional M.2 extension board

______________________________________________________

Additional information & Setup instructions

https://wiki.radxa.com/Rockpi4

______________________________________________________

QuinLED Dig Uno v3 DIGITAL LED controller
New

Extremely cool, flexible and easy to use Digital LED controller!

Perfectly integrates into your home automation or easy to use as a stand alone solution! Now even better - with generic WLED support and Dual Channel!

$29.50 Sold Out

Extremely cool, flexible and easy to use Digital LED controller!

Perfectly integrates into your home automation or easy to use as a stand alone solution! Now even better - with generic WLED support and Dual Channel!

Technical details:

  • QuinLED ESP32 based programmable LED controller
  • Choice of 3 different ESP32 module variants
    • AB (Antenna Board)
    • AE (Antenna External) (incl. ext. antenna)
    • ABE (Antenna Board + Ethernet)
  • Dual Channel controller (when using WLED 0.12.0)
  • Official WLED support
  • Compatible to open firmware e.g. ESPhome, ESPpixelstick or custom Arduino code
  • Integrates with MQTT or Home Assistant native API (use WLED FW)
  • Remote control available via Android or iOS app (WLED FW)
  • Can be used for E1.31 with Xlights /Vixen software (use WLED or ESPpixelstick FW)
  • Auto 5V-24V input voltage select
  • Auto 5vEXT with 5-24V standby auto select
  • High current handling (up to 15A)
  • On-board fuse and reverse polarity protection
  • Compatible to 5V* and 12V** LED strips, strings or panels
  • optional On-board temperature sensor (mounted on demand***)
  • 6 GPIO pins (e.g. PS Relay, IR control or I2C display)
  • Works with most currently available LED strips/strings or panels*

* ws2811, ws2812b, sk6812, APA102

**ws2811, ws2815

***pls contact us via shop_cn@allnetchina.cn

Product content:

  • QuinLED Dig Uno v3r7 LED controller
  • QuinLED-ESP32 WIFI module with USB-C interface
  • Pre flashed WLED firmware for instant use
  • please check the different product variants available

OUTSTANDING!

  • With a few simple steps to a working system
  • Easy to use and at the same time ready for complex setups
  • Extremely detailed library and resources
  • Very supportive community and developer
  • You have a question to LED and LED related applications - go QuinLED

    Youtube introduction and instructions (click on the text):

    More details and resources here:

    • In depth information on LEDs
    • Wiring diagrams, articles, simply everything related to LEDs
    • https://quinled.info

      Last but not least a great 3D printable case:  https://www.thingiverse.com/thing:4153725

      QuinLED Dig Quad v3 DIGITAL LED controller    !NEW improved release!
      New

      Packed with the feature-set of the well known Dig Uno controller plus 2 times the output channels and a blasting current of up to 30A show the muscles of this controller. NEW! pcb design update, new screw terminals, generic WLED support and 3 different ESP32 variants!

      $39.50

      Packed with the feature-set of the well known Dig Uno controller plus 2 times the output channels and a blasting current of up to 30A show the muscles of this controller. NEW! pcb design update, new screw terminals, generic WLED support and 3 different ESP32 variants!

      The onboard QuinLED ESP32 module with generic WLED support comes in 3 different variants and preloaded software.

      QuinLED Dig Quad perfectly integrates into your home automation or performs as a stand alone solution!

      Technical details:

      • QuinLED ESP32 based programmable LED controller with 4 independent output channels
      • Compatible to open firmware e.g. ESPhome, ESPpixelstick or custom Arduino code
      • Integrates with MQTT or Home Assistant native API (use WLED FW)
      • Remote control available via Android or iOS app (WLED FW)
      • Can be used for E1.31 with Xlights /Vixen software (use WLED or ESPpixelstick FW)
      • High current handling (up to 30A)
      • On-board 5x 5A fuse and reverse polarity protection
      • Compatible to 5V*, 12V**, 24V*** LED strips, strings or panels
      • On-board DS18B20 temperature sensor
      • 6 GPIO pins (e.g. Audio, PS Relay, IR control or I2C display)
      • Works with most currently available LED strips/strings or panels*

      * ws2811, ws2812b, sk6812, APA102

      **ws2811, ws2815

      ***ws2811, sk6812, tm1814

      Product content:

      • QuinLED Dig Quad LED controller board
      • QuinLED ESP32 WIFI module with USB-C interface (3 different variants available)
      • 5x 5A fuses
      • NEW - bigger screw terminals for easier cable management
      • Pre flashed WLED firmware for instant use

      OUTSTANDING!

      • With a few simple steps to a working system
      • Easy to use and at the same time ready for complex setups
      • Extremely detailed library and resources
      • Very supportive community and developer
      • You have a question to LED and LED related applications - go QuinLED

        Youtube introduction and instructions (click on the text):

        More details and resources here:

        • In depth information on LEDs
        • Wiring diagrams, articles, simply everything related to LEDs
        • https://quinled.info

        Login