ROCK PI 4 Accessories

Shop By
eMMC 5.1 for ROCK PI 4 (also for ODroid)

Plug on eMMC 5.1 storage media

Available in 16GB/ 32GB/ 64GB or 128GB

$11.95

Plug on eMMC 5.1 storage media

Available in 16GB/ 32GB/ 64GB or 128GB

As well compatible to ODroid and Pine

PLEASE NOTE: For your convenience please order as well the eMMC to uSD adapter board. It makes it easy to flash software images on to the eMMC module.

 

ROCK PI 4x - M.2 Extension board v1.6
New
translation missing: en.products.product.regular_price $9.99

Enhance the usability of the ROCK PI 4 M.2 connector in mounting this extension board on top of the board or below the big heat sink.

Works with both versions ROCK PI 4A/ 4B

translation missing: en.products.product.regular_price $9.99

Enhance the usability of the ROCK PI 4 M.2 connector in mounting this extension board on top of the board or below the big heat sink.

Works with both versions ROCK PI 4A/ 4B

The new M.2 Extension board v1.6 was improved based on the community feedback.

Improvements:

Gold plated connectors for stable data transmission

In the previous version the connectors where simple FPC connectors. They could easy break, and the ribbon cable could be mounted wrong. The connectors do not only avoid the cable to be plugged in wrongly, it also has a lock to avoid displacement of the connector.

Improved Ribbon cable with mounted gold plated connectors on both sides 

The previous ribbon cable was always a subject to discussions. People complained that the cable was not providing stable data transmission, because the connection via FPC connector was not precise and well enough. They also said interference could happen because no ground lines where used for isolation inside of the ribbon cable.

Both issues have been addressed. Not only does the cable now have gold plated connectors on both sides, the layout also takes very much care about the shielding between the high speed data lines. Smart arrangement makes sure that no data is lost. The connectors do have additional springs to ensure a stable connection even when the board is moved.

The only disadvantage now is the fact, that the cable length can not easily be adjusted with replacement cables anymore. 

Redesigned interface board to the M.2 connector of Rock Pi 4

One of the sometimes complicated things was mounting the small interface board because it interfered a bit when the eMMC module on the bottom side of the board was mounted. I did not have any negative effects, though many thought it was not possible to mount them together.

The newley updated M.2 extension board with its updated features and specs will make the PCIe experience on your Rock Pi 4 leading edge!

Product includes:

  • M.2 Extension board
  • Mini PCB adapter for the connection to the on-board M.2 socket
  • High performance ribbon cable
  • Mounting bolts and screws

 

 

ROCK PI 802.3at PoE HAT
New
translation missing: en.products.product.regular_price $19.99

Power your ROCK PI 4B with the ROCK PI 802.3at PoE HAT

translation missing: en.products.product.regular_price $19.99

Power your ROCK PI 4B with the ROCK PI 802.3at PoE HAT

Specs:

  • compliant to the 802.3at standard with 23W
  • PWM controlled fan with up to 12000rpm
  • completely redesigned with performance and heat management in mind
  • very low profile allows usage in smaller housings (fits the ecoPI PRO LP case)
  • alternate variant with GPIO pin pass through available
  • attractive price

 

 

eMMC to uSD board for ROCK PI 4
translation missing: en.products.product.regular_price $1.95

ROCK PI 4 Accessory

eMMC to uSD (micro SD) adapter board for easily flashing software images on to eMMC modules.

Best to use with "Etcher" flashing software.

translation missing: en.products.product.regular_price $1.95

ROCK PI 4 Accessory

eMMC to uSD (micro SD) adapter board for easily flashing software images on to eMMC modules.

Best to use with "Etcher" flashing software.

USB3.1 to eMMC Reader/Writer
translation missing: en.products.product.regular_price $7.99

True blasting USB3.1 performance!!

The perfect tool for flashing software images with USB3.1 speed on to your eMMC module.

translation missing: en.products.product.regular_price $7.99

True blasting USB3.1 performance!!

The perfect tool for flashing software images with USB3.1 speed on to your eMMC module.

  • High speed USB3.1 Gen2 GL3227E controller
  • Write speed up to 150MB/s
  • Dual mount for eMMC module
  • Support eMMC HS400 mode
  • Support ROCK PI eMMC modules up to 128GB
  • Compatible to ODROID / Pine64 eMMC modules
  • Support GPT partition table and firmware

Use your old eMMC module as USB drive..

Supported under Linux, Windows, MacOS

 

 

Rock Pi E Developers package
New
translation missing: en.products.product.regular_price $6.99

Rock Pi E based development made convenient!

translation missing: en.products.product.regular_price $6.99

Rock Pi E based development made convenient!

  • Board protection through acrylic cover
  • Easy access to all relevant parts of the board
  • includes GPIO extension pin header
  • cut out for easy removal and mount of the eMMC module
  • includes dual band antenna
  • micro HDMI to HDMI female adapter cable

Product content:

  • Acrylic cover with mounting screws and bolts
  • 40 pin GPIO extension pin header
  • 2.4/5GHz antenna kit with pigtail
  • micro HDMI to HDMI female adapter cable

Just add the Rock Pi E of your choice and you are ready to go!

Power Supply Adapter QC 3.0 for ROCK PI 4
translation missing: en.products.product.regular_price $6.95

ROCK PI 4 Accessory

Power Supply Adapter QC 3.0

Input: AC110-240V 50/60Hz 0.3A
Output: DC5V=2.6A / 9V=1.7A / 12V=1.3A 

translation missing: en.products.product.regular_price $6.95

ROCK PI 4 Accessory

Power Supply Adapter QC 3.0

Input: AC110-240V 50/60Hz 0.3A
Output: DC5V=2.6A / 9V=1.7A / 12V=1.3A 

USB 2.0 Male Type A to C 3A 1m for ROCK PI 4
translation missing: en.products.product.regular_price $2.95

ROCK PI 4 Accessory

Power cable for QC adapter

Length: 1m

translation missing: en.products.product.regular_price $2.95

ROCK PI 4 Accessory

Power cable for QC adapter

Length: 1m

M.2 to PCIe X4 adapter
translation missing: en.products.product.regular_price $3.99
Make your M.2 interface accessible for PCIe PC size cards on your Rock Pi 4
translation missing: en.products.product.regular_price $3.99
Make your M.2 interface accessible for PCIe PC size cards on your Rock Pi 4
  • easy to mount on to the M.2 extension board
  • convert the M.2 interface to a standard PCIe X4 slot
  • expand the available interfaces of your Rock Pi 4
  • comes with an additional 12V power cable
  • please check the compatibility of your slot card with Rock Pi 4

Rock Pi 4 does not support additional graphics cards via PCIe interface 

USB 3.0 Male Type A to A 1m for ROCK PI 4
translation missing: en.products.product.regular_price $3.95

ROCK PI 4 Accessory

For USB firmware upgrading, USB gadgets and Android ADB debug

Length: 1m

translation missing: en.products.product.regular_price $3.95

ROCK PI 4 Accessory

For USB firmware upgrading, USB gadgets and Android ADB debug

Length: 1m

USB-TTL Debug Cable 1m for ROCK PI Boards
translation missing: en.products.product.regular_price $3.95

USB to RS232 TTL Debug Cable

FTDI chipset

Length: 1m

translation missing: en.products.product.regular_price $3.95

USB to RS232 TTL Debug Cable

FTDI chipset

Length: 1m

USB-C3.1 male to USB3.0 A cable 1.5m
translation missing: en.products.product.regular_price $2.50
PROMOTION!
translation missing: en.products.product.regular_price $2.50
PROMOTION!

Login