PENTA SATA KIT for Rock5 Model A
Easily build your own PCIe based NAS / Media-server with a Rock5 Model A
Description
- mount up to 4x 2.5" HDD or SSD (max height 9.5mm) + 1x ext HDD or SSD
- esatap connector for external SSD/HDD
- Software RAID 0/1/5
- HDD/SSD status LED online/activity/fault
- Utilizes PCIe gen2 4 lanes interface on Rock Pi 4
- DC power input for Rock5 A, 4x 2.5inch sata drives and 1x esatap 2.5 or 3.5" HDD/SSD
- HDD suspend mode supported
- UASP support
- Internal capacity up to 32TB (e.g. 4x 8TB SSD)
- PWM controlled fan for HDD heat dispatching
- OLED display for IP Address/Storage info (customizable)
- does only work with Rock5 Model A
- easy to set up and run
- Size (L/W/H) 94 x 70 x 175 mm
Product Content
- PENTA SATA HAT board (via M.2 to NVMe adapter)
- SATA HAT Top board, management board including OLED status display and active cooling
- HAT connector cable
- ecoPI Penta Sata case (aluminum)
- High performance ribbon data cable and connector
- active cooling for Rock5 Model A
What is so special?
- smaller than a bottle of Coke
- fits into the smallest book shelf
- PCIe gen2 based SATA interface
- PWM controlled fan
- high internal capacity up to 32TB (e.g. 4x 8TB SSD)
- economically as a surveillance system
- fast as media server / cloud server
- backup server for your home
- OLED display for status information
- Backup your NAS with e.g. an external 3.5" esatap powered drive of your choice!
- nice lean design
IMPORTANT:
You need to use a 12V (>=5A) >=60W DC Power supply to run this NAS!
Does only work with Rock5 Model A!
eMMC is needed to boot the device (because of stability and limited space)
Just add your Rock5 Model A and eMMC to this kit and your blasting NAS is complete!
Bundle offers:
Penta Sata Case Kit:
Penta Sata case for Rock5 Model A
Power supply
Bundle 1:
Penta Sata Kit for Rock5 Model A incl. Case
Penta Sata hat and top board
Power supply
Bundle 2:
Penta Sata Kit for Rock5 Model A incl. Case
Penta Sata hat and top board
Power supply
Rock5 Model A (8GB RAM)
16gb eMMC
usd to eMMC adapter board