QuinLED Dig-Octa System
The QuinLED Dig-Octa System is the first modular and scalable solution for addressable LEDs in the QuinLED line of products.
It is by design structured as modular and scalable solution.
QuinLED Dig-Uno and Dig-Quad controllers are great and compact boards for many installations.
If you plan to grow and enhance your setup and need more power, the modular Dig-Octa System line of products might be the perfect choice for you.
The QuinLED-Dig-Octa Brainboard-32-8L is controlled by the Espressif ESP32 WROOM module and is the core of the Dig-Octa controller system.
The QuinLED-Dig-Octa Brainboard-32-8L is controlled by the Espressif ESP32 WROOM module and is the core of the Dig-Octa controller system.
This module provides a good amount of power to drive LEDs while as well allowing a variety of options to generate the LED data either locally or remote.
Product Specifications:
- Based around Espressif ESP32-WROOM-32UE (ext. antenna only)
- Built-in WiFi + Ethernet
- SDcard reader
- I2C (with onboard SHT30 I2C temp and humidity sensor)
- 3x simultaneous power-in connections
- Dedicated relay output terminals
- 2x input button/switch terminals
- Boot/Reset buttons available
- 5x M2.5 board mounting holes
LED Features:
- 8x level-shifted LED data output channels
- Level-shifted using 2x 4 port level-shifters to 5.12v
- all terminals are pluggable to simplify management when stacked
- Per channel resistor DIP switches
- Defaults to 249Ω but can be switches per port to 33Ω for better compatibility with 3-wire cable setups
- “Hardware driven” using ESP32 RMT device channels
Special features:
- Compatible with QPowerPost (power distribution without wires)
- Custom DC-DC circuit allowing 5v-24v in while always providing 5.12v out
- 3x 800mA 3.3v LDO onboard for extra stability
- LAN enable jumper
- MOSFET based relay circuit
*) in depth product details you find @QuinLED.info (pls follow the link)
The Dig-Octa Power-5 power board provides stable power distribution via its 12 pluggable output terminals.
The Dig-Octa Power-5 power board provides stable power distribution via its 12 pluggable output terminals.
It is stackable and has the standardized form factor of all power boards in the Dig-Octa line of products.
Product Specifications:
- 3x 9.5mm “barrier block” input terminals for both positive and negative
- Board recommended max 50Amp continuous load total
- 12x 5.08mm pluggable output terminals
- 5v-24v capable
- “Broken Fuse” light per output
- Onboard capacitors
- Onboard Voltage display
- 4x M3 mounting holes
Special features:
- Equipped with QPowerPost* (power distribution without wires)
- Additional 1x 5.08mm pluggable terminal (VCC and GND out)
*) what is QPowerPost?
QPowerPost is a smart and unique solution to supply power via power posts to the brainboard in a stack. All power boards in the Dig-Octa line of products provide this feature.
It allows a flexible and quick installation of the complete stack and works without additional wiring.
**) in depth product details you find @QuinLED.info (pls follow the link)
The Dig-Octa Power-7 power board distributes stable power via a high number of 32 screw terminals.
The Dig-Octa Power-7 power board distributes stable power via a high number of 32 screw terminals.
The 7.62mm screw terminals are split in 2 banks each for positive and negative power. They are divided over 3 sides of the board.
Product Specifications:
- 3x 9.5mm “barrier block” input terminals for both positive and negative
- Board recommended max 50Amp continuous load total
- 16x 7.62mm output screw terminals
- 5v-24v capable
- “Broken Fuse” light per output
- Onboard capacitors
- Onboard Voltage display
- 4x M3 mounting holes
Special Features:
- Equipped with QPowerPost* (power distribution without wires)
- Additional 1x 5.08mm pluggable terminal (VCC and GND out)
- Double up feature**
*) what is QPowerPost?
QPowerPost is a smart and unique solution to supply power via power posts to the brainboard in a stack. All power boards in the Dig-Octa line of products provide this feature.
It allows a flexible and quick installation of the complete stack and works without additional wiring.
**) what is Double up feature?
If more power (up to 20Amps) or a thicker cable is required, using a SV5.5-5 fork crimp 2 positive and 2 negative output terminals can be combined allowing up 10AWG/5.2mm2 cable to be connected over 2 output ports
***) in depth product details you find @QuinLED.info (pls follow the link)
The Dig-Octa Power-7HC power board provides up to 100A current via a high number of 32 screw terminals.
The Dig-Octa Power-7HC power board provides up to 100A current via a high number of 32 screw terminals.
Power-7HC has increased copper thickness, 2x M5 bare screw power terminals which are equipped with 2x 60A fuses.
Product Specifications:
- 2x M5 bolt lugs for both positive and negative
- Board recommended max 100Amp continuous load total
- 16x 7.62mm output screw terminals
- 5v-24v capable
- “Broken Fuse” light per output
- Onboard capacitors
- Onboard Voltage display
- 4x M3 mounting holes
Special Features:
- Equipped with QPowerPost* (power distribution without wires)
- Extra 1x 5.08mm pluggable terminal (VCC and GND out)
- Double up feature**
*) what is QPowerPost?
QPowerPost is a smart and unique solution to supply power via power posts to the brainboard in a stack. All power boards in the Dig-Octa line of products provide this feature.
It allows a flexible and quick installation of the complete stack and works without additional wiring.
**) what is Double up feature?
If more power (up to 20Amps) or a thicker cable is required, using a SV5.5-5 fork crimp 2 positive and 2 negative output terminals can be combined allowing up 10AWG/5.2mm2 cable to be connected over 2 output ports
***) in depth product details to Power-7HC you find @QuinLED.info (pls follow the link)