QuinLED Controllers and Accessories

Shop By
QuinLED Dig-Octa Brainboard 32-8L
Translation missing: en.products.product.regular_price $32.50

The QuinLED-Dig-Octa Brainboard-32-8L is controlled by the Espressif ESP32 WROOM module and is the core of the Dig-Octa controller system.

Translation missing: en.products.product.regular_price $32.50

The QuinLED-Dig-Octa Brainboard-32-8L is controlled by the Espressif ESP32 WROOM module and is the core of the Dig-Octa controller system.

This module provides a good amount of power to drive LEDs while as well allowing a variety of options to generate the LED data either locally or remote.

 Product Specifications:

  • Based around Espressif ESP32-WROOM-32UE (ext. antenna only)
  • Built-in WiFi + Ethernet
  • SDcard reader
  • I2C (with onboard SHT30 I2C temp and humidity sensor)
  • 3x simultaneous power-in connections
  • Dedicated relay output terminals
  • 2x input button/switch terminals
  • Boot/Reset buttons available
  • 5x M2.5 board mounting holes

LED Features:

  • 8x level-shifted LED data output channels
  • Level-shifted using 2x 4 port level-shifters to 5.12v
  • all terminals are pluggable to simplify management when stacked
  • Per channel resistor DIP switches
  • Defaults to 249Ω but can be switches per port to 33Ω for better compatibility with 3-wire cable setups
  • “Hardware driven” using ESP32 RMT device channels

Special features:

  • Compatible with QPowerPost (power distribution without wires)
  • Custom DC-DC circuit allowing 5v-24v in while always providing 5.12v out
  • 3x 800mA 3.3v LDO onboard for extra stability
  • LAN enable jumper
  • MOSFET based relay circuit

 

*) in depth product details you find @QuinLED.info (pls follow the link)


QuinLED Dig-Octa Power-5
Translation missing: en.products.product.regular_price $32.50

The Dig-Octa Power-5 power board provides stable power distribution via its 12 pluggable output terminals.

Translation missing: en.products.product.regular_price $32.50

The Dig-Octa Power-5 power board provides stable power distribution via its 12 pluggable output terminals.

It is stackable and has the standardized form factor of all power boards in the Dig-Octa line of products.

Product Specifications:

  • 3x 9.5mm “barrier block” input terminals for both positive and negative
  • Board recommended max 50Amp continuous load total
  • 12x 5.08mm pluggable output terminals
  • 5v-24v capable
  • “Broken Fuse” light per output
  • Onboard capacitors
  • Onboard Voltage display
  • 4x M3 mounting holes

Special features:

  • Equipped with QPowerPost* (power distribution without wires)
  • Additional 1x 5.08mm pluggable terminal (VCC and GND out)

 

*) what is QPowerPost?

QPowerPost is a smart and unique solution to supply power via power posts to the brainboard in a stack. All power boards in the Dig-Octa line of products provide this feature.

It allows a flexible and quick installation of the complete stack and works without additional wiring.

 **) in depth product details you find @QuinLED.info (pls follow the link)

 

 

QuinLED Dig-Octa Power-7
Translation missing: en.products.product.regular_price $34.99

The Dig-Octa Power-7 power board distributes stable power via a high number of 32 screw terminals. 

Translation missing: en.products.product.regular_price $34.99

The Dig-Octa Power-7 power board distributes stable power via a high number of 32 screw terminals. 

The 7.62mm screw terminals are split in 2 banks each for positive and negative power.  They are divided over 3 sides of the board.

Product Specifications:

  • 3x 9.5mm “barrier block” input terminals for both positive and negative
  • Board recommended max 50Amp continuous load total
  • 16x 7.62mm output screw terminals
  • 5v-24v capable
  • “Broken Fuse” light per output
  • Onboard capacitors
  • Onboard Voltage display
  • 4x M3 mounting holes

Special Features:

  • Equipped with QPowerPost* (power distribution without wires)
  • Additional 1x 5.08mm pluggable terminal (VCC and GND out)
  • Double up feature**

 

*) what is QPowerPost?

QPowerPost is a smart and unique solution to supply power via power posts to the brainboard in a stack. All power boards in the Dig-Octa line of products provide this feature.

It allows a flexible and quick installation of the complete stack and works without additional wiring.

**) what is Double up feature?

If more power (up to 20Amps) or a thicker cable is required, using a SV5.5-5 fork crimp 2 positive and 2 negative output terminals can be combined allowing up 10AWG/5.2mm2 cable to be connected over 2 output ports

 ***) in depth product details you find @QuinLED.info (pls follow the link)

 

 

QuinLED Dig-Octa Power-7HC
Translation missing: en.products.product.regular_price $44.99

The Dig-Octa Power-7HC power board provides up to 100A current via a high number of 32 screw terminals. 

Translation missing: en.products.product.regular_price $44.99

The Dig-Octa Power-7HC power board provides up to 100A current via a high number of 32 screw terminals. 

Power-7HC has increased copper thickness, 2x M5 bare screw power terminals which are equipped with 2x 60A fuses.

Product Specifications:

  • 2x M5 bolt lugs for both positive and negative
  • Board recommended max 100Amp continuous load total
  • 16x 7.62mm output screw terminals
  • 5v-24v capable
  • “Broken Fuse” light per output
  • Onboard capacitors
  • Onboard Voltage display
  • 4x M3 mounting holes

Special Features:

  • Equipped with QPowerPost* (power distribution without wires)
  • Extra 1x 5.08mm pluggable terminal (VCC and GND out)
  • Double up feature**

 

*) what is QPowerPost?

QPowerPost is a smart and unique solution to supply power via power posts to the brainboard in a stack. All power boards in the Dig-Octa line of products provide this feature.

It allows a flexible and quick installation of the complete stack and works without additional wiring.

**) what is Double up feature?

If more power (up to 20Amps) or a thicker cable is required, using a SV5.5-5 fork crimp 2 positive and 2 negative output terminals can be combined allowing up 10AWG/5.2mm2 cable to be connected over 2 output ports

 ***) in depth product details to Power-7HC you find @QuinLED.info (pls follow the link)

QuinLED dig2GO portable DIGITAL LED controller
Translation missing: en.products.product.regular_price $24.99

Easiest to use ESP32 based digital LED yet - small enough to take on the road!

Translation missing: en.products.product.regular_price $24.99

Easiest to use ESP32 based digital LED yet - small enough to take on the road!

Control your digital LED strip out of your pocket.  

The rich feature set of this  small pocket LED controller will surprise you!

Perfect for your party or events using WS2812x strips. Can even be powered by a good USB power bank.

Interfaces and connectors:

  • USB-C connector (power, programming)
  • Digital Microphone
  • IR - remote controllable
  • ON/OFF button
  • Interface for additional accessories (dual socket header)

Max Power: 5V3A 

Pigtail for LED strip connection included

-Plug in the LEDs, plug in a USB-C cable (like for your phone) and you are done-

Flash the newest firmware online here:

https://install.quinled.info

USB-A Powersupply 5V
Translation missing: en.products.product.regular_price $4.99

Provide stable operation to your 5V powered devices!

Translation missing: en.products.product.regular_price $4.99

Provide stable operation to your 5V powered devices!

  • small form factor
  • 5V3A
  • USB-A socket

CE, RoHS, UL, FCC certified

Antenna Pig-tail with 25cm length
Translation missing: en.products.product.regular_price $1.90

This antenna pigtail offers 25cm of convenient length, allowing you to easily connect your device to the antenna.

Using this variant with extended length will help you to conveniently mount your antenna stick for better wifi coverage.

If you need customized lengths - pls drop us a mail - shop_cn@allnetchina.cn

Translation missing: en.products.product.regular_price $1.90

This antenna pigtail offers 25cm of convenient length, allowing you to easily connect your device to the antenna.

Using this variant with extended length will help you to conveniently mount your antenna stick for better wifi coverage.

If you need customized lengths - pls drop us a mail - shop_cn@allnetchina.cn

QuinLED dig2GO portable DIGITAL LED controller bundles

Easiest to use ESP32 based digital LED yet - small enough to take on the road!

$32.49

Easiest to use ESP32 based digital LED yet - small enough to take on the road!

Control your digital LED strip out of your pocket - now combined with power supply and LED strip.  

The rich feature set of this  small pocket LED controller will surprise you!

Perfect for your party or events now with WS2812x /SK6812 strips and power supply. Can alternatively even powered by a good USB power bank.

Interfaces and connectors:

  • USB-C connector (power, programming)
  • Digital Microphone
  • IR - remote controllable
  • ON/OFF button
  • Interface for additional accessories (dual socket header)

Max Power: 5V3A

Bundle contents:

  • dig2GO portable controller
  • Pigtail for LED strip connection
  • Power supply 5V3A
  • WS2812 (RGB /4m) or SK6812 (RGBW /5m) as a choice
  • High power rated USB-A to C cable (1m)

- Plug in the LEDs, plug in the USB-C cable and you are done -


Get started with your new QuinLED dig2GO here:

 https://dig2go.info/v1-landing

Flash the latest firmware online here:

https://install.quinled.info

 

 

 

ALLNET 64GB microSDXC UHS-1 Memory Card
Translation missing: en.products.product.regular_price $3.99

Reliable Quality and great performance

Translation missing: en.products.product.regular_price $3.99

Reliable Quality and great performance

Max read/write speed:

Writing :42.0MB/S
Reading:80.6MB/S

Real Capacity: 59.5GB

Please contact us for mass deployment - shop_cn@allnetchina.cn


Login